Oilfield Terminology & Definitions.
Home Topic

Stimulation & Intervention

Stimulation and intervention encompass techniques that improve well flow and reservoir contact, such as hydraulic fracturing, acidizing, and workovers. These methods increase production rates, extend field life, and enhance overall recovery efficiency.

  • Nitrogen Kick
    50

    A Nitrogen Kick is an unplanned, rapid influx of nitrogen gas into the wellbore during stimulation or intervention operations, typically arising from the use of…

  • Overbalance Perforating
    55

    Overbalance perforating is a well intervention technique used to create holes in casing, cement, and formation to establish hydraulic communication between the reservoir and the…

  • Proppant
    51

    Proppant is a granular material, typically sand, ceramic beads, or resin-coated particles, that is pumped into a well during hydraulic fracturing (fracing) operations to prop…

  • Rigless Intervention
    51

    Rigless intervention refers to a set of well intervention techniques performed without the need for a conventional drilling or workover rig. Instead, these operations utilize…

  • Sand Control
    74

    Sand control refers to a set of specialized techniques and technologies employed in oil and gas wells to prevent the production of formation sand (unconsolidated…

  • Skin Effect
    47

    Skin effect is a dimensionless parameter used in petroleum engineering to describe the condition of the near-wellbore region. It represents an additional pressure drop (or…

  • Slickline
    53

    Slickline is a mechanical intervention method used in oil and gas wells to perform a variety of downhole tasks without killing the well or pulling…

  • Slickwater
    53

    Slickwater is a low-viscosity, water-based fracturing fluid used extensively in hydraulic fracturing operations, particularly for stimulating tight oil and gas reservoirs such as shale formations.…

  • Snubbing
    48

    Snubbing is a specialized well intervention technique used to run or pull pipe (tubing, drill pipe, or casing) into or out of a well that…

  • Swabbing
    48

    Swabbing is a well intervention technique used in the oil and gas industry to remove fluids from the wellbore, typically to initiate or increase the…

  • Tubing Conveyed Perforating
    46

    Tubing Conveyed Perforating (TCP) is a highly efficient and precise well intervention technique used to create perforations in the casing and cement sheath of an…

  • Underbalance Perforating
    53

    Underbalance perforating is a well intervention technique used during the completion or re-completion of oil and gas wells. It involves firing shaped charges to create…